Static elimination / Static generating / Static measuring equipment

Hildebrand Technology AG manufacture a comprehensive range of static neutralising, static generating and static measuring systems.

Static elimination

Static elimination / neutralising systems are used for the neutralisation of static charges present on a substrates surface. High voltage is used to generate positive and negative ions which flow to the target material and neutralise the imbalance of surface charge. Our systems can neutralise both positive and negative charge without operator intervention.

Our IONstream 5.0 AC system operates at 50 or 60Hz depending on local supply frequency.

IONstream 5.0

Active high efficiency electrostatic neutralising system.

Especially suitable for industrial applications which demand reliability, quality and safety.

Highly efficient up to substrate speeds of 600m/min

100% Static discharging capability up to 300mm from substrate surface

10mm Emitter pin pitch for maximum neutralising efficiency

‘Self healing’ long life emitter pin technology

‘E-field’ optimised neutralising bar profile

Resistant to many common cleaning solvents

Robust aluminium profile body

IONstream 5.0F

Active high efficiency electrostatic neutralising system with contamination monitoring and feedback function.

Especially suitable for critical applications where 100% control and monitoring are required

Potential free contact for status monitoring

Function primary side

Function secondary side

Contamination

IONstream 5.0EX

Active high efficiency electrostatic neutralising system with contamination monitoring and feedback function for EX applications.

Especially suitable for critical EX applications where 100% control and monitoring are required

Ionstream 5.0 F based platform

ATEX certified electrostatic neutralising bar

II 2G Ex mb IIA T6 (-20º ≤ Ta ≤ +50º C

Electrostatic discharging DC
Page under construction

IONcontrol            Content coming soon

IONcontrol NT       Content coming soon

IONcontrol EX       Content coming soon

Static generating

Electrostatic charging systems are used to generate a temporary bond between 2 surfaces.

This bond is sufficient to hold the surfaces together for a short period of time and is used in a variety of industries. Some examples are given below.

Chill Roll	Laminating	IML Bottles	Coating	Edge Pinning	Ribbon Tracking	Reel Changeover	Blocking

IONtacker fusion

Latest generation high efficiency static charging system.

High voltage power unit integrated into charging electrode.
Especially suitable for applications where high voltage cable can cause a problem and small dimensions are required.

• Fully adjustable 0-20KV - 30Watt

• Current- or voltage constant

• Positive or negative output voltage

• 10mm emitter pin pitch for highest charging field homogeneity

• Emitter pin material made of Tungsten to achieve longest possible pin life time

• Local or external control 0-10V. Voltage and current monitor signal

• Resistant against most common cleaning and solvent agents

• Rigid glass fibre enforced electrode body

IONtacker remote

Flexible, cost effective charging system for a wide range of applications.
Smallest possible electrode profile dimensions.
Fits to all Hildebrand charging electrodes.
Especially suitable for applications where simple charging is required.

• Fully adjustable 0-20/25/30KV - 30Watt

• Current - or voltage constant

• Positive or negative output voltage

• 10mm emitter pin pitch for highest charging field homogeneity

• Emitter pin material made of Tungsten to achieve longest possible pin life time

• Local or external control 0-10V. Voltage and current monitor signal

• Resistant against most common cleaning and solvent agents.

• Rigid glass fibre enforced electrode body

IONtacker dual

Same specification as IONtacker remote.
Especially suitable for applications where both polarities are needed at the same time.

• Positive and negative output voltage integrated in same generator enclosure

IONtacker

Standard industrial charging system for a wide range of different applications. Smallest possible electrode profile dimensions.
Fits to all Hildebrand charging electrodes.
Especially suitable for applications where local display of output voltage and current is important.

• Fully adjustable 0-20/25/30KV - 30/60Watt

• Current - or voltage constant

• Positive or negative output voltage

• 10mm emitter pin pitch for highest charging field homogeneity

• Emitter pin material made of Tungsten to achieve longest possible pin life time

• Local control, Voltage and current monitor displayl

• Resistant against most common cleaning and solvent agents

• Rigid glass fibre enforced electrode body

Static measuring equipment

Content coming soon.