Electrostatic charging systems are used to generate a temporary bond between 2 surfaces.

This bond is sufficient to hold the surfaces together for a short period of time and is used in a variety of industries. Some examples are given below.

Chill Roll	Laminating	IML Bottles	Coating	Edge Pinning	Ribbon Tracking	Reel Changeover	Blocking

IONtacker fusion

Our latest generation of high efficiency static charging system.

The high voltage power supply is integrated into the charging bar.

Especially suitable for applications where an external high voltage supply and cable can problematic. 

Also especially suited to applications where the charging bar needs to be positioned inside a turret as the system can be powered through 24V slip rings.

Fully adjustable 0-20KV - 30Watt

Current- or voltage constant

Positive or negative output voltage

24V DC supply voltage

10mm emitter pin pitch for highest charging field homogeneity

Emitter pin material made of Tungsten to achieve longest possible pin life time

Local or external control 0-10V. Voltage and current monitor signal

Resistant against most common cleaning and solvent agents

Rigid glass fibre enforced electrode body

IONtacker remote

Flexible, cost effective charging system for a wide range of applications.

Smallest possible electrode profile dimensions.

Fits to all Hildebrand charging electrodes.

Especially suitable for applications where simple charging is required.

Fully adjustable 0-20/25/30KV - 30Watt

Current - or voltage constant

Positive or negative output voltage

10mm emitter pin pitch for highest charging field homogeneity

Emitter pin material made of Tungsten to achieve longest possible pin life time

Local or external control 0-10V. Voltage and current monitor signal

Resistant against most common cleaning and solvent agents.

Rigid glass fibre enforced electrode body

IONtacker dual

Same specification as IONtacker remote.

Especially suitable for applications where both polarities are needed at the same time.

Positive and negative output voltage integrated in same generator enclosure

IONtacker

Standard industrial charging system for a wide range of different applications.

Smallest possible electrode profile dimensions.

Fits to all Hildebrand charging electrodes.

Especially suitable for applications where local display of output voltage and current is important.

Fully adjustable 0-20/25/30KV - 30/60Watt

Current - or voltage constant

Positive or negative output voltage

10mm emitter pin pitch for highest charging field homogeneity

Emitter pin material made of Tungsten to achieve longest possible pin life time

Local control, Voltage and current monitor display

Resistant against most common cleaning and solvent agents

Rigid glass fibre enforced electrode body

Static charging static pinning edge pinning constant current constant voltage electrostatic charging static generators